![]() You loaded onto your device, you can set your device to Safe Mode. This mode is one of the most useful forĭevelopment or for troubleshooting. Safe mode, breathing magenta (red and blue at the same time), connects the device to the cloud, but does not run any application firmware. LTE Cat M1 devices can connect without a battery. The USB power supply may not supply enough current to connect, especially to 2G. Battery required in some casesįor 2G/3G devices, you should always connect a battery. If you antenna is disconnected, not compatible with your device, or damaged you could get stuck in blinking green.Īdjusting the antenna position may help, and on some devices using a larger external antenna can help. Note that different devices have different sets of carriers, even with a Particle SIM, as there are four different Particle SIM cards. No local carrierĬheck the Carrier List to make sure you have a compatible cellular carrier for your device and location. Likewise, some EMEAA models including the B Series SoM (B524, B523), Tracker (ONE524, ONE523, T524, T523) will not connect in North America, and will only connect in limited circumstances in other locations in the Americas.ĢG/3G models including the Boron 2G/3G (BRN314, BRN310), E Series (E310), Electron (U270, U260, G350) may have connectivity impacted by 2G/3G shutdown in some countries. The devices will not generally connect from other locations and will be be stuck in blinking green. Some devices, including the Boron LTE (BRN404X, BRN404, BRN402), B Series LTE (B404X, B404, B402), Tracker SoM (ONE404, ONE402, T404, T402), E Series LTE (E404X, E404, E402), Electron LTE (ELC402) are only intended for use in North America, the United States, Canada and Mexico. ![]() You can check the status in the Particle console.Īlso check the console billing page to make sure your account is not paused. Also if you manually deactivate your SIM card, it will get stuck in blinking green. This normally happens during device setup, but if you set up your device manually you can miss this step. This can take anywhere from a few seconds to several minutes. Blinking green indicates that your cellular device is attempting to connect to the cellular network.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |